METLAB FAST CURE ACRYLIC IS FAST CURING TRANSLUSCENT TWO COMPONENT ACRYLIC CASTING SYSTEM. SPECIMENS MAY USUALLY BE REMOVED AFTER 5-10 MIN. AT ROOM TEMPERATURE.

GLASS FILLED CURING ACRYLIC.
Same as our Fast Cure Acrylic but exhibits a higher hardness with excellent edge retention with minimal shrinkage. Shore D Hardness 95. Color is opaque black

JET SET EPOXY IS A LOW VISCOSITY, TWO COMPONENT CLEAR CASTING RESIN. JET SET EPOXY GELS RAPIDLY AT ROOM TEMPERATURE AND CURES TO A CLEAR TOUGH CHEMICAL RESISTANT COMPOUND.

METLAB FAST CURE EPOXY IS A LOW VISCOSITY, TWO COMPONENT CLEAR CASTING RESIN. METLAB FAST CURE EPOXY GELS RAPIDLY AT ROOM TEMPERATURE AND CURES TO A CLEAR TOUGH CHEMICAL RESISTANT COMPOUND.

METLAB POLYESTER IS A CLEAR, TWO COMPONENT, ROOM TEMPERATURE CURING, CASTING RESIN.

A SILICONE COMPOUND MEDIA USED TO MAKE REPLICAS DIRECTLY ON SURFACES. CURES IN 4.5 MIN.

A fast polymerising cold curing three-component resin based on modified polyester supplied as powder, syrup I and syrup II. TECHNOVIT 4000 is suitable for the gap-free embedding of specimens that are difficult to embed because of their shape or coating and which cannot be exposed to high emperature or pressure which require (s) fast and accurate testing and which the embedding material must be abrasion resistant. Color is white Mixing ratio 2:2:1 Processing time 4 min. Curing time at 22 degrees C is 7 min.
750g powder, 500ml syrup I, 250ml syrup II